Operation Manual

Setting up
100
Operating manual 911 - Version 00.0 - 06/2013
10.7 Electrical connection
10.7.1 Check the rated voltage
1. Check the mains voltage before connecting the machine.
10.7.2 Connect the mains power
1. Connect the mains plug: 230V - 50/60 Hz
10.7.3 Sewing motor direction of rotation
The direction of rotation does not need to be checked because this is
automatically set by the controller.
Danger to life due to electric shock
The machine may only be connected by trained electrical
specialists.
Disconnect the power plug before carrying out work on the
electrical equipment. Make sure the power plug cannot be
unintentionally reinserted.
It is essential that you observe the information in the operating
manual of the stepper motor manufacturer provided with the
DANGER
Danger to life due to electric shock
The voltage on the type plate of the sewing drive must
correspond to the mains voltage.
DANGER