Operation Manual

Setting up
Operating manual 911 - Version 00.0 - 06/2013
99
10.5 Set up the pedal
The foot pedal can be freely positioned in front of the sewing unit as far as
the cable allows.
Figure 65: Set up the pedal
1. Position the foot pedal (1) in front of the sewing unit so that the pedal
and machine can be comfortably operated.
10.6 Attach the thread reel holders
Figure 66: Attach the thread reel holders
1. Insert the thread reel holders (1) into the holes in the table plate.
2. Fasten the thread reel holders (1) to the table plate using the nuts (4).
3. Screw the thread reel holder (3 and the unwinding bracket (2) onto the
thread stand in such a way that they are exactly parallel above each other.
(1) - Foot pedal
཰
(1) - Thread reel holder
(2) - Unwinding bracket
(3) - Thread plate
(4) - Nuts
཰
ཱ
ི
ཱི
཰