Operation Manual

Setup
Operating Instructions 911-210 - 01.0 - 11/2015 97
8.5 Set up the pedal
The foot pedal can be freely positioned in front of the machine as far as
the cable allows.
Fig. 70: Set up the pedal
1. Position the foot pedal (1) in front of the machine so that the pedal and
machine can be comfortably operated.
8.6 Attach the thread reel holders
Fig. 71: Attach the thread reel holders
1. Insert the thread reel holders (1) into the holes in the table plate.
2. Fasten the thread reel holders (1) to the table plate using the nuts (4).
3. Screw the thread reel holder (3 and the unwinding bracket (2) onto the
thread stand in such a way that they are exactly parallel above each
other.
(1) - Foot pedal
①
(1) - Thread reel holder
(2) - Unwinding bracket
(3) - Thread plate
(4) - Nuts
①
②
③
④
①