Operation Manual

Setup
94 Operating Instructions 911-210 - 01.0 - 11/2015
Transport on own frame rollers
The frame feet must be rotated upwards for transportation using the inte-
grated frame rollers.
Fig. 67: Transporting the machine using the integrated frame rollers
Before transport
1. Release the nuts (1) on the frame feet (2).
2. Rotate the frame feet (2) fully upwards.
3. Tighten the nuts (1) so that the frame feet (2) remain upwards.
After transport
1. Release the nuts (1) on the frame feet (2).
2. Rotate the frame feet (2) downwards so that the frame stands evenly
and stable on all 4 feet.
3. Tighten the nuts (1) at all 4 frame feet.
8.3 Transport locks
The transport locks protect the machine during movement and must be re-
moved before setting up.
1. Remove all transport locks before setting up the machine.
Important: The transport locks must be fitted again if the machine is trans-
ported in the future.
(1) - Nut
(2) - Frame foot
(3) - Roller
③
①
②
Possible machine damage through unsecured transport.
Never transport the machine without the transport locks.
NOTICE