Operation Manual

Maintenance
88 Operating Instructions 911-210 - 01.0 - 11/2015
7.3.3 Cleaning the filter element
Abb. 64: Cleaning the filter element
Cleaning steps
1. Drain the water condensation ( S. 86).
2. Unscrew the water separator (2).
3. Unscrew the filter element (1).
4. Blow out the filter element (1) using a compressed air gun.
5. Wash out the filter tray using benzine.
6. Tighten the filter element (1).
7. Tighten the water separator (2).
8. Tighten the drain screw (3).
WARNING
Risk of injury.
Switch off the machine at the main power switch
and disconnect it from the pneumatic network
before you clean the filter element.
NOTICE
Damage to the paintwork due to solvent-based cleaners.
Solvent-based cleaners damage the filter.
Use only solvent-free substances for washing out the filter tray.
(1) - Filter element
(2) - Water separator
(3) - Drain screw
①
②③