Operation Manual

Maintenance
Operating Instructions 911-210 - 01.0 - 11/2015 87
Correct setting
Water condensation cannot rise up to the filter element (1).
Check the water level in the water separator on a daily basis.
Abb. 63: Draining the water condensation
Maintenance steps
1. Place the collection tray under the drain screw (3).
2. Unscrew the drain screw (3) completely.
3. Allow water to drain into the collection tray.
4. Tighten the drain screw (3).
WARNING
Risk of injury.
Switch off the machine at the main power switch
and disconnect it from the pneumatic network
before you drain the water from the water
separator.
NOTICE
Machine damage due to too much water.
Too much water can result in damage to the machine.
Check the water level every day and drain water, if necessary.
(1) - Filter element
(2) - Water separator
(3) - Drain screw
①
②③