Operation Manual

Maintenance
84 Operating Instructions 911-210 - 01.0 - 11/2015
7.2.1 Lubrication of the upper part of the machine
The central oil lubrication system supplies all bearing positions automati-
cally with oil from the reservoir.
Correct setting
The oil level is between the minimum level marking and the maximum lev-
el marking.
Abb. 60: Lubrication of the upper part of the machine
Setting steps
1. Check the oil level indicator every day.
2. If the oil level is below the minimum level marking (3):
Pour oil through the refill opening (1) but no higher than the maximum
level marking (2).
NOTICE
Machine damage due to incorrect oil level.
Too little or too much oil can result in damages to the machine.
Check the oil level every day and top up the oil, if necessary.
(1) - Refill opening
(2) - Maximum level marking
(3) - Minimum level marking
②
①
③