Operation Manual

Maintenance
Operating Instructions 911-210 - 01.0 - 11/2015 83
7.2 Lubrication
Required oil:
Only DA 10 or equivalent oil should be used for the machine, which has
the following properties:
• Viscosity at 40 °C: 10 mm²/s - ISO VG10
• Flash point: 150 °C
DA 10 can be obtained under the following part number at DA sales offic-
es:
• 9047 000011 - 250 ml
• 9047 000012 - 1 l
• 9047 000013 - 2 l
• 9047 000014 - 5 l
WARNING
Risk of injuries due to contact with oil!
Contact with oil can cause irritation, rashes,
allergies or skin injuries.
ALWAYS avoid long-term contact with oil.
ALWAYS thoroughly wash the affected areas if
contact with oil occurs.
ATTENTION
Risk of environmental damage from oil.
Oil is a pollutant and must not enter the sewage
system or the soil.
Carefully collect waste oil and dispose of the waste
oil and oil-contaminated machine parts in the
legally prescribed manner.
NOTICE
Machine damage possible due to incorrect oil.
An incorrect oil type can cause damage to the machine.
Only use oil that complies with the data in these instructions.