Operation Manual

DA-CAD 5000
Operating Instructions 911-210 - 01.0 - 11/2015 77
6 DA-CAD 5000
You can use the DA-CAD 5000 program to create seam programs on a
PC. The DA-CAD 5000 program is available as additional equipment.
This section only provides an overview of the program steps. A detailed
description is provided in the  Operating Instructions for the
DA-CAD 5000 program.
Selecting the machine class.
The first step is to select the machine class.
Fig. 55: Select the machine class
Creating the seam contour
The next step is to draw the seam contour.
Fig. 56: Draw the seam contour