Operation Manual

Settings via software
76 Operating Instructions 911-210 - 01.0 - 11/2015
You can obtain a suitable USB stick from Dürkopp Adler.
Software
update
1. Switch off the machine
2. Insert the USB stick into the USB connector (1) on the operating ter-
minal.
Fig. 54: Updating the controller
3. Switch on the machine.
 The software update is performed automatically.
If the automatic update does not function then you can use the menu items
Extras > Service > Initialization and Update > option
Update the controller to load a specific software version.
Contact the Dürkopp Adler Service Hotline for this.
Displaying software version information
The menu item
? displays information on the software currently installed
on the machine.
Display
version in-
formation I
1. Tap menu items ? > Info.
 The following information is displayed:
•Class
• Subclass
• Software version
• Date of creation of this software version
(1) - USB connector
①