Operation Manual

Settings via software
Operating Instructions 911-210 - 01.0 - 11/2015 75
Fig. 53: Initialization and Update
Initializing the controller
Attention: Initializing the controller resets all values to the factory de-
faults. All changes are lost.
Only execute this option if you really want to return to the factory settings.
Save your
programs!
Save your seam programs an sequences to a USB stick before performing
initialization.
Reset the
controller
1. Tap the Initialize the Controller option.
 The controller is completely reset to the factory default settings.
Initialize control panel
Attention: Initializing the control panel resets all values to the factory de-
faults. All changes are lost.
Only execute this option if you really want to return to the factory settings.
Reset the
control
panel
1. Tap the Initialize the control panel option.
 The control panel is completely reset to the factory default settings.
Updating the controller
The latest software version is available at www.duerkopp-adler.com.
You can easily transfer a new software version from a USB stick to the
controller.
Not all commonly available USB sticks are suitable for the copying pro-
cess.