Operation Manual

Settings via software
Operating Instructions 911-210 - 01.0 - 11/2015 73
Fig. 51: Testing the sewing motor
Important: Remove the thread from the needle and needle lever before
starting the test.
Testing
the sewing
motor
2. Tap the button.
 The window for entering the sewing speed opens.
3. Enter the desired value (300 - 2000 rpm).
4. Tap the button.
 The window for entering the cutting speed opens.
5. Enter the desired value (70 - 500 rpm).
6. Tap the button.
 The sewing motor runs at the entered sewing speed.
7. Tap the button.
 The sewing motor stops.
8. Tap the button.
 The sewing motor runs at the entered sewing speed.
9. Tap the button.
 The sewing motor stops and the thread cutter is actuated.
Calling up log displays and error lists
You can access the log settings and error lists via
Extras > Service
>
System Information.