Operation Manual

Settings via software
72 Operating Instructions 911-210 - 01.0 - 11/2015
Calling the
sewing
foot test
1. In the menu item Extras > Service > Multitest tap the Set
stroke
position option.
 The following options are displayed:
Testing
the sewing
foot
2. Tap the desired symbol and execute the function.
Testing the sewing motor
Call up the
motor test
1. In the menu item Extras > Service > Multitest tap the
Test sewing motor option.
 The sewing motor test screen is displayed:
Setting stroke position
Symbol Meaning
Perform a reference run
Check the movement
Switching between a hopper and presser foot.
Switch over the mode of operation
Move to position
Set the sewing foot height
Switch off the power to the drives
Manually check the freedom of motion of the sewing foot rod
Risk of injury from sharp or moving parts.
Do not reach into the machine during the function test of the
sewing motor.
WARNING