Operation Manual

Settings via software
Operating Instructions 911-210 - 01.0 - 11/2015 71
Setting stroke position
Input elements
No. Meaning
S1 Lower right clamp
S2 Lower left clamp
S9 Needle thread monitor active
S10 Bobbin cover closed
S11 Upper housing latch closed
S13 Pedal forwards
S14 Pedal backwards
S16 Pressure monitor
S17 Fast stop
S100 Sewing motor reference
S101 X-axis reference
S102 Y-axis reference
S103 Z-axis reference
Output elements
No. Meaning
Y1 Foot mode
Y2 Bobbin flap open
Y3 Needle cooling on
Y4 Right clamp
Y5 Left clamp
Y9 Threading switch lamp on
Y10 Oil level indicator warning light on
Y25 Laser marking lamp 1 (Z)
Y26 Laser marking lamp 2 (Z)
Y27 Laser marking lamp 3 (Z)
Y28 Laser marking lamp 4 (Z)
Risk of injury from sharp or moving parts.
Do not reach into the machine when setting the stroke position.
Switch off the power to the drive when you wish to test the
freedom of motion of the sewing foot rod.
WARNING