Operation Manual

Settings via software
70 Operating Instructions 911-210 - 01.0 - 11/2015
Testing inputs and outputs
These instructions only provide an overview of the test possibilities.
The tests may only be performed by qualified personnel that have re-
ceived training from Dürkopp Adler.
Call up the
test page
1. In the menu item Extras > Service > Multitest tap the
Test inputs / outputs option.
 The
IO Test Page window is displayed.
Fig. 50: Testing inputs and outputs
The input elements are listed and selected at the left side (1) and the out-
put elements at the right side (2).
Testing an
element
2. Use Select + or Select - to select the desired element in the
respective area.
 The number of the element is displayed on the
Selected: button.
3. Tap the
Selected: button.
4. Test the element using the
On/Off or Switchover buttons,
depending on the type of the input or output element.
Risk of injury from sharp or moving parts.
Do reach into the machine during function testing of the input or
output elements.
WARNING
(1) - Area for input elements (2) - Area for output elements
①②