Operation Manual

Settings via software
Operating Instructions 911-210 - 01.0 - 11/2015 69
3. Pull the corresponding slider control up or down to change the value.
 The changes are immediately visible on the display.
Testing the touchscreen
You can use the
Extras > Service > Settings menu item to
check that the touchscreen is functioning correctly over all areas of the
screen.
Touch test 1. In the menu item Extras > Service > Settings tap the Con-
trol panel settings
option.
2. In the following window tap the
Touch Test option.
 An empty window is opened.
3. Use your finger to tap various different points or draw lines.
 When the touchscreen is functioning correctly all touched points of
the screen are marked.
Testing machine functions
You can use the
Extras > Service > Multitest menu item to
check the inputs and outputs, test the sewing motor and set the stroke po-
sition.
Fig. 49: Multitest
The Transport clamps function is only intended for use by
Dürkopp Adler Service personnel.