Operation Manual

Settings via software
52 Operating Instructions 911-210 - 01.0 - 11/2015
5.15 Copying a seam program or sequence
You can also copy seam programs or sequences from a USB stick to the
controller or from the controller to a USB stick.
Not all commonly available USB sticks are suitable for the copying pro-
cess.
You can obtain a suitable USB stick from Dürkopp Adler.
Copy file Select the file
1. Tap the menu items
File > Copy.
 The window for selecting the file to be copied appears:
Fig. 41: Copying a seam program or sequence
2. Use the buttons (1) to select whether the data is to be copied from the
DAC controller or the USB stick.
 The selected button is highlighted with a dark background.
The files present at this location are list in a selection window (2).
You can use the
File Filter to make the list more manageable
( p. 37).
3. Tap the desired file.
 The selected file is highlighted with a dark background.
4. Tap the
Copy File button.
 The selected file is copied to the USB stick or the controller.
(1) - Select the source to be copied (2) - File selection window
①
②