Operation Manual

Settings via software
Operating Instructions 911-210 - 01.0 - 11/2015 49
2. Move along the contour stitch by stitch using the Forward and Back
buttons.
3. Check that all points lie within the sewing area.
5.12 Creating a new sequence
You can combine up to 30 seam programs to form a sequence. You can
create up to 20 sequences.
Create a
sequence
Select the seam program
1. Tap the menu items
File > New > Sequence.
 The window for selecting the seam program appears.
Fig. 39: Select the seam programs for the sequence
The existing seam programs are displayed at the right side of the screen.
The
Sequence field at the left shows the seam programs that currently
exists in the sequence.
Select the
program
2. Tap the desired program
 The selected program is highlighted with a dark background.
Damage to the machine through exceeding the sewing field size.
If you have entered contour points that lie outside the sewing field then
the movement of the clamps during sewing can cause damage to the
machine or the sewing material.
Always perform a contour test every time after creating or editing a
contour to ensure that the entire contour lies within the permissible
sewing field.
NOTICE