Operation Manual

Settings via software
Operating Instructions 911-210 - 01.0 - 11/2015 41
Zoom on/
off
Switching between the displays:
1. Tap the menu items
Extras > Zoom on/off.
 The display switches to the respective other mode.
5.5 Opening a seam program or sequence for sewing
You will usually open an existing seam program or and existing sewing se-
quence.
Opening a
program
1. Tap the menu items File > Open.
 The file selection screen is displayed.
All existing seam programs and sequences are displayed.
You can use the
File Filter to make the list more manageable,
 5.4.6 Using file filters, p. 37.
Fig. 31: Opening a file
2. Tap the desired file.
3. Tap the
Open button.
 The seam program/sequence is opened on the main screen.
4. Press the pedal forwards to start sewing.
5.6 Briefly sewing with modified values
If you must briefly sew a special material, or use a particular thread
strength with different values, without changing the seam program you
can use the
Correction menu item to temporarily change the values
for thread tension and sewing speed. The values then apply to all subse-
quently executed seams until the machine is switched off.