Operation Manual

Settings via software
32 Operating Instructions 911-210 - 01.0 - 11/2015
Fig. 18: Main screen
Structure of the main screen
Title bar (1)
On the main screen this contains the version of the machine. In the various
menus this bar contains information on the currently selected menu item.
Status bar (2)
On the main screen, the currently open sequence is displayed here at the
left and the time of day (11) is displayed at the right. In the various menus
this bar contains information on the currently selected step.
Main window (3)
The contour to be sewn is displayed here.
Program bar (4)
The seam programs of the currently open sequence are displayed here.
The program currently being executed is highlighted in black. The arrow
buttons (6) at the right side of the bar can be used to navigate along the
bar and display any additional programs that do not fit on the bar.
If a sequence is not currently open but rather only a single seam program
then this program fills the entire bar.
Menu bar (5)
The bar at the bottom contains the popup menus. This allows you to ac-
cess the various different menu items for creating and editing seam pro-
grams and for performing settings and tests on the machine. An arrow (1)
next to a menu entry indicates that tapping the entry will display further
submenu entries.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
(1) - Title bar
(2) - Status bar
(3) - Main window: Display of the seam con-
tour
(4) - Program bar
(5) - Menu bar: Popup menus
(6) - Arrow buttons for navigating within the
bar
(7) - Button for resetting the counter
(8) - Button for bobbin change
(9) - Display of the current seam parame-
ters
(10) - Button for repair mode
(11) - Clock display