Operation Manual

Settings via software
Operating Instructions 911-210 - 01.0 - 11/2015 31
5.3 Starting the software
After switching on the machine at the main power switch the machine per-
forms a reference run. After this, the startup screen is shown on the oper-
ating terminal for a few seconds.
Fig. 17: Startup screen
Here you can select the user interface language or use Service to
quickly access the
Multitest menu.
Both functions can also be accessed later from within the program via the
menu items
Extras > Service,
 Testing machine functions, p. 69 and
 Changing the language, p. 68.
If you do not tap any buttons the software automatically switches to the
main screen after a few seconds.
The main screen
The main screen is displayed during sewing. When the machine is started
the main screen is opened with the settings of the last sewing program
used.
(1) - Language selection button (2) - Multitest quick-access button
①②