Operation Manual

Settings via software
30 Operating Instructions 911-210 - 01.0 - 11/2015
5.2 Overview of the menu structure
The following table provides an overview of the menu structure and the function buttons on the
main screen.
Different colors indicate which functions are mainly used for normal sewing operations, which
items are used for creating and maintaining seam programs and the menu items that are used
for making technical settings.
Green: Menu items for sewing
Blue: Menu items for creating and managing programs
Magenta: Menu items for settings and information used by technicians
Menu items in popup menus
Menu item Function Submenu items Submenu items Described on
File Open existing sewing
programs, create new
programs, copy or delete
existing programs.
Delete
 page 67
Copy
 page 52
Open
 page 41
New Seam program
 page 45
Sequence
 page 49
Save As
 page 51
Edit Define general settings
for all programs or mod-
ify an existing program.
Machine Parameters
 page 61
Sequence
 page 61
Seam program Parameters
 page 56
Contour Adjustment
 page 56
Contour Test
 page 48
Extras Display options: full-
screen and zoom
Technician menu: Set-
tings, system informa-
tion and tests
Full-screen on/off
 page 40
Zoom on/off
 page 40
Service Settings
 page 67
System Information
 page 73
Multitest
 page 67
Initialization and
Update
 page 74
Manufacturer (for DA personnel only)
Corrections Short-term sewing with
other values
Thread tension
 page 42
Sewing Speed
 page 42
Buttons on the main screen
Continue sewing the contour from a particular
point
Repair Mode
 page 44
Allow for a manual bobbin change Changing the bobbin
 page 43
Reset counter to a particular value Reset counter
 page 45