Operation Manual

Operation
Operating Instructions 911-210 - 01.0 - 11/2015 25
8. Press the bobbin winder flap (4) against the bobbin.
 The winder starts and stops automatically when the configured bob-
bin filling volume is reached.
(Setting of the bobbin filling volume is described in the
 Service Instructions.)
4.9 Replacing the hook thread bobbin
Fig. 13: Replacing the hook thread bobbin - Part 1
1. Remove the sewing material holder (1) (for alternating frames only).
2. Press the Safe Stop button (2).
 The drive carriage moves to the bobbin change position.
The cover plate (4) pivots to the side.
The sewing feet are moved to the lower position.
The lighting (3) is switched on.
Risk of injury by the needle point or moving parts.
Switch the machine to the Safe Stop mode before changing the
bobbin.
WARNING
(1) - Sewing material holder
(2) - Safe Stop switch
(3) - Lighting
(4) - Cover plate
①
②
③
④