Operation Manual

Operation
Operating Instructions 911-210 - 01.0 - 11/2015 19
4.4.2 Lowering the machine upper section
Fig. 7: Lowering the machine upper section
1. Hold the machine upper section in the head cover region.
2. Release the latch (4).
3. Carefully lower the machine upper section.
4. Latch the locking lever (3) under the table plate.
Risk of injury from sharp or moving parts.
Do not reach into the table plate cutout when the machine
upper section is raised.
WARNING
Danger of crushing from falling upper section.
Hold the upper section firmly when lowering until it is once more
in position.
WARNING
Danger of machine damage from falling upper section.
Hold the upper section firmly when lowering until it is once more in
position.
NOTICE
(3) - Locking lever (4) - Latch
③
④