Operation Manual

Operation
18 Operating Instructions 911-210 - 01.0 - 11/2015
4.4 Raising and lowering the machine upper section
The machine upper section can be raised for maintenance work.
4.4.1 Raising the machine upper section
Important: The drive carriage (2) must be at the rear.
Fig. 5: Drive carriage positioned at the rear
Fig. 6: Raising the machine upper section
1. Release the locking lever (3) under the table plate.
2. Lift the machine upper section in the head cover region (1) and raise
carefully.
 The latch (4) latches into place.
The space under the machine table is now accessible.
Risk of injury from sharp or moving parts.
Switch off the machine at the main power switch before raising
the machine upper section and performing maintenance work.
WARNING
(1) - Head cover
(2) - Driver carriage
①
②
(3) - Locking lever (4) - Latch
③
④