Manualshelf

Operation Manual

ManualsBrandsDurkopp Adler ManualsMiscellaneous911-210
11121314151617181920
Operation
16 Operating Instructions 911-210 - 01.0 - 11/2015
4.2 Switching on Safe Stop
Fig. 3: Switching on Safe Stop
Switching on Safe Stop
1. Press in the switch (1).
Important: The switch button must latch into place.
The machine is in the Safe Stop mode.
The sewing feet are moved to the lower position.
The lamp in the button lights up.
The area around the hook cover (2) is lit up.
Switching off Safe Stop
1. Press in the switch (1) again.
Important: The switch button must latch out of place.
Risk of injury from sharp or moving parts.
The machine must first be switched off or switched to a Safe
Stop before performing any maintenance or setup work.
When the Safe Stop is active, do not reach into the hook area
until this is lit up.
WARNING