Operation Manual

Safety
10 Operating Instructions 911-210 - 01.0 - 11/2015
The machine may only be set up by qualified specialists.
Maintenance work and repairs may only be carried out by qualified spe-
cialists.
Safety equipment may not be removed or put out of service. If this cannot
be avoided for a repair operation, the safety equipment must be refitted
and put back into service immediately afterwards.
Work on electrical equipment may only be carried out by qualified electri-
cal specialists.
The connecting cable must have a power plug approved in the specific
country. The power plug may only be connected to the power cable by a
qualified electrician.
Work on live components and equipment is prohibited. Exceptions are de-
fined in the specifications in DIN VDE 0105.
Missing or faulty spare parts could impair safety and damage the machine.
Therefore only use original spare parts from the manufacturer.
2.2 Signal words and symbols used in safety instructions
The safety instruction text is surrounded by colored bars.
Signal words specify the severity of a danger:
Signal word Degree of severity
DANGER Resulting in death or serious injury.
WARNING Death or serious injury possible.
CAUTION Moderate to minor injuries possible.
NOTICE Machine damage possible.