Operation Manual

Troubleshooting
106 Operating Instructions 911-210 - 01.0 - 11/2015
10.2 Messages of the software
10.2.1 Information messages
Code Description Troubleshooting
8400 Control panel has no valid pro-
gram for the DAC
Load the current program into the con-
trol panel from a USB stick.
8401
8402
Control panel has no valid pro-
gram for the DAC
Load the current program into the con-
trol panel from a USB stick.
8403 Program in DAC is no longer cur-
rent.
Load the current program into the
DAC.
8404
8407
DAC update failed. • Attempt the update again
• Check cable connections
• Replace the DAC
8408 Waiting for a DAC reset. Wait until the restart has been per-
formed
(Duration: a few seconds).
8411 DAC program check is active. Wait until the test has been performed
(Duration: a few seconds).
8414 DAC update succeeded.
8801
8805
8806
8890
8891
Error in test pins/signal process-
ing/event processing/
memory wrapper/
list functions
Internal error
• Switch the machine off and on again
• Software update
• Notify DA Service
System
9000 Reference run active
9002 Upper part not locked Lock the upper part
9006 Quick-stop button is active Release the Quick-stop button
9016 Incorrect barcode ID Change the program
9100 The counter has not reached the
specified value.
Tap the OK button. The counter is
reset.