Operation Manual

Setup
98 Operating Instructions 911-210 - 01.0 - 11/2015
8.7 Electrical connection
8.7.1 Check the rated voltage
1. Check the mains voltage before connecting the machine.
8.7.2 Connect the mains power
1. Connect the mains plug.
8.7.3 Sewing motor direction of rotation
The direction of rotation does not need to be checked because this is au-
tomatically set by the controller.
Danger to life due to electric shock.
The machine may only be connected by trained electrical
specialists.
Disconnect the power plug before carrying out work on the
electrical equipment. Make sure the power plug cannot be
unintentionally reinserted.
It is essential that you observe the information in the
Operating Instructions of the stepper motor manufacturer
provided with the unit.
DANGER
Danger to life due to electric shock.
The voltage on the type plate of the sewing drive must
correspond to the mains voltage.
DANGER