Operation Manual

10.2 Oil lubrication

Caution: Danger of injury !

Oil can cause skin eruption.

Avoid a longer contact with the skin.

Wash yourself thoroughly after a contact.

ATTENTION !

The handling and disposal of mineral oils is subject to legal

regulations.

Deliver used oil to an authorized collecting s tation.

Protect your environment.

Be careful not to spill any oil.

Oil the sewing unit exclusively with lubricating oil DA-10 or an

equivalent oil with the following specification:

–

Viscosity at 40° C: 10 mm²/s

–

Ignition point: 150° C

DA-10 can be bought at the sales points of

DÜRKOPP-ADLER AG under the following parts numbers:

250 ml-Container: 9047 000011

1-Litre-Container: 9047 000012

2-Litre-Container: 9047 000013

5-Litre-Container: 9047 000014

Maintenance w ork Explanation Operating

to be done hours

Lubrication of the

sew ing unit

The sewing unit is equipped with a central oil

wick lubrication. The bearings are provided by

the oil reservoirs 2 and 4.

- The oil level must always be visible in the

inspection glass of the two reservoirs.

- Fill up oil up to the red marking through the

drill-holes 1 and 3.