Operation Manual

Outputs

With this test function the function of the output elements is checked.

–

Start the test function with the “OK”key.

–

Select the desired output element with the keys “ñ ”or“ò ”.

–

Confirm the selected output element with the “OK”key.

–

Switch the output element with the keys “ï”or“ð ”.

–

Press the function key “ESC” for quitting the test function.

Caution: Risk of injury !

Do not reach into the running machine during the function test of the

output elements.

Output Function

element

5 Needle cooling

6 Clamp 2 open/ closed

7 Clamp 1 open/ closed

8 Lift/ lower the foot

9 Lamp “Safe stop”

10 to 16 Laser lamps

17 Lower / Lift the thread burner

18 Retract the upper thread burner

19 Thread wiper

20 Retract the lower thread burner

21 Thread burner heater on