Operation Manual

Bobbin max.
Initial value of the bobbin capacity counter
Input: 0 ... 99990
If the value is set to “0", the stitch counter is
switched off.
Determining the bobbin capacity
–
Set Bobbin max. to “0".
–
Confirm “bobbin changed”.
Current bobbin is set to “0".
–
Press the “ESC”key.
–
Insert full bobbin.
–
Sew until the bobbin is empty.
–
Call up the “counter menu”.
–
Read off Current bobbin.
–
EnteravaluelessareserveinthefieldBobbin max..
Example: - 50 stitches per seam pattern.
Note
Confirm “bobbin changed” after every bobbin change.
Current bobbin
Current bobbin capacity.
Deleting parts
Reset the parts counter
–
Press the “OK”key.
The parts counter is reset to “0".
Parts
Display of the sewn parts.
27
1