Operation Manual

When the sequence mode is active, the first line in the main menu will

change.

If the “S” key is pressed, the cursor will flash and the desired

sequence (1....8) can be selected by pressing the keys “ñ”or“ò”.

In the selected sequence (e.g. 1), the next sewing program can be

selected using the keys “ï”or“ð”.

Change/Delete sequence

Select the storage location using the cursor key and confirm your

choice by pressing the “OK”key.

The following possibilities are available:

–

Replacing a program

Press the “OK” key and select a new program from the memory.

–

Deleting a program

Press the “ESC” key (you will then exit the menu and all available

programs will move up).