Operation Manual

8.1.1 The keys
Function key Function
Cursor keys
In the sew ing mode or sequence mode:
Shift the cursor to the left or to the right.
In the sew ing mode in case of sequence operation :
Change to the next or to the preceding sewing sample.
If not input field is activated:
Change between the lines of the menus.
The selected line is displayed inversely.
If an input field is activated:
Increase or reduce the value of the respective point by one or change
between the parameters in case of functions with several choices.
OK-key If no input field is activated:
Activate the input field.
The value can be altered with the keys “ñ ” and “ò ”.
If an input field is activated:
The set value is taken over.
ESC-key If test functions are activated:
You return to the selection menu.
If an input field is activated:
An input is aborted.
The preceding value is maintained.
In the technician and programming level:
The control changes over to the preceding level.
P-key Loading, saving and deleting of programs.
S-key Select the next program.
In the sequence mode:
Change sequences.
F-key Call up Multitest and sw itch over to the technician level.
1
19