Operation Manual

7. Operating
7.1 Switching on - Switching off - Safe stop
7.1.1 Switching on
–
Switchonthemainswitch1.
–
Step the pedal back to reach the initial position of the sewing unit.
The main menu appears in the display.
7.1.2 Switching off
–
Switch off the main switch 1.
All drives and the control are immediately separated from the
mains.
7.1.3 Safe stop
The sewing unit has to be switched off or switched to “safe stop” before
carrying out any work on it.
Sw itching on “safe stop”
–
Press key 2.
The key must snap in!
The sewing unit is in “safe stop” condition.
The lamp in the key is shining.
Sw itching off “safe stop”
–
Press key 2 again.
The key must be released.
–
Step the pedal back to reach the initial position of the sewing unit.
9
1
21