Operating instructions

Settings via the software
Operating instructions 906 - Version 00.0 - 05/2014
97
PP3 - Removal mode
Symbol Meaning
Removal mode
The following options can be set:
Mode 1 (Def.)
Stacker active.
Mode 2
Reserved (function as with Mode 1)
Mode 3
Reserved (function as with Mode 1)
Mode 4
Reserved (function as with Mode 1)
Mode 5
Stacker inactive.
Removal position
(On/Off)
With the removal position activated the clamps move to the desired posi-
tion for convenient removal of the sewing material after the sewing proce-
dure.
Removal position X
The specified value can be changed for corrections.
Removal position X and insertion position X must correspond.
Removal position Y
The specified value can be changed for corrections.
Removal position Y and insertion position Y must correspond.
PP4 - Softstart
Symbol Meaning
Number of softstart stitches
(min. = 0 .. max. = 10; Def. = 5)
Softstart speed
(min. = 100 .. max. = 2000; Def. =300 rpm)