Operating instructions

Settings via the software
96
Operating instructions 906 - Version 00.0 - 05/2014
PP2 - Insertion mode
Symbol Meaning
Insertion mode
The following options can be set:
Mode 1 (Def.)
Standard sewing mode with transfer of the material.
In the insertion position, the outer frame, inner slider and transfer plate are
open. The sewing procedure runs in the following sequence:
• Use foot pedal: The transfer plate is closed.
• Use two-hand control: The material is transferred to the outer frame/inner
slider and the sewing starts.
Mode 2
Reserved (function as with Mode 1)
Mode 3
Reserved (function as with Mode 1)
Mode 4
Reserved (function as with Mode 1)
Mode 5
Mode for service purposes.
The outer frame and inner slider can be put in three positions.
The next position is set by using the foot pedal. The positions change
in the following order:
• Outer frame closed and inner slider open
• Outer frame and inner slider closed
• Outer frame and inner slider open
Insertion position
(On/Off)
With the insertion position activated the clamps move to the desired posi-
tion for convenient insertion of the sewing material.
Insertion position X
The specified value can be changed for corrections.
Insertion position X and removal position X must correspond.
Insertion position Y
The specified value can be changed for corrections.
Insertion position X and removal position Y must correspond.