Operating instructions

Settings via the software
Operating instructions 906 - Version 00.0 - 05/2014
93
7.17.2 Changing the parameters
You can also change the general settings that apply to the entire seam
program.
1. Tap the menu items Edit > Seam program > Parameters.
 The window for selecting the program parameter group is opened.
Figure 67: Selecting the program parameter group
2. Tap the desired parameter group.
 The individual parameters of this group are displayed.
3. Tap the desired parameter.
 The window for modifying the parameter opens.
4. Set the parameter to the desired value ( 7.4.8 Entering parameter
values, page 72).