Operating instructions

Settings via the software
90
Operating instructions 906 - Version 00.0 - 05/2014
Figure 63: Contour adjustment – Part 2
4. Use the arrow keys to select the stitching point (1) to be changed.
5. Tap the Go To button.
 The window for changing the seam path is displayed.
Figure 64: Contour adjustment – Part 3
6. Use the arrow buttons to move the stitching point to the new position (1).
 The modified seam path is displayed in green.
7. Tap the Next button.
 The window for selecting the technology operations opens.
(1) - Stitching point to be changed
①
(1) - Green: New stitching point (2) - Red: Old stitching point
①
②