Operating instructions

Settings via the software

Operating instructions 906 - Version 00.0 - 05/2014

7.17 Editing an existing seam program

You can change the contour and parameters of existing seam programs.

The changes are applied to the seam program that is currently open on

the main screen.

Selecting the program to be edited

1. Open the sequence you wish to modify via the menu items File > Open

( page 74).

 The program is opened in the main screen.

7.17.1 Adjusting a contour

1. Tap the menu items Edit > Seam program > Adjust Contour.

 The contour adjustment window is displayed.

Figure 62: Contour adjustment – Part 1

2. Use the arrow keys to move the cursor (1) to the position on the contour

that is to be changed.

You can also move to the position on the contour that is to be changed

with the slider control (2).

Top scale: First stitch of the seam appearance.

Bottom scale: Last stitch of the seam appearance.

3. Tap the Go To button.

 The selected contour region is displayed in detail.

(1) - Cursor (2) - Scale: First to last stitch

①

②