Operating instructions

Settings via the software

Operating instructions 906 - Version 00.0 - 05/2014

7.15 Copying a seam program or sequence

You can also copy seam programs or sequences from a USB stick to the

controller or from the controller to a USB stick.

Not all commonly available USB sticks are suitable for the copying pro-

cess. You can obtain a suitable USB stick from Dürkopp Adler using the

order number 9805 791113.

Select the file

1. Tap the menu items File > Copy.

 The window for selecting the file to be copied appears.

Figure 60: Copying a seam program or sequence

2. Use the buttons (1) to select whether the data is to be copied from the

DAC controller or the USB stick.

 The selected button is highlighted with a dark background. The files

present at this location are listed in a selection window (2).

You can limit the selection with File filter. This makes the list

more manageable ( 7.4.6 Using file filters, page 70).

3. Tap the desired file.

 The selected file is highlighted with a dark background.

4. Tap theCopy File button.

 The selected file is copied to the USB stick or the controller.

(1) - Select the source to be copied (2) - File selection window

①

②