Operating instructions

Settings via the software
82
Operating instructions 906 - Version 00.0 - 05/2014
Saving the program
After you have defined all the seam paths, you can save the program and
specify a name.
9. Tap the Save... button.
 The window for entering the program name opens.
10.Enter the desired name and adopt the change by pressing OK.
 7.4.7 Entering text, page 71
 The program is now available under this name for sewing, editing or
copying.
Important: After creating or changing a program, perform a contour test
( 7.11 Performing a contour test, page 83). Ensure that the contour lies
within the limits of your particular unit.
ATTENTION
Damage to the machine by exceeding the sewing field size
If you have entered contour points that lie outside the sewing field then
the movement of the clamps during sewing can cause damage to the
machine or the sewing material.
After creating or changing a program, perform a contour test. This way,
you can check whether the entire contour lies within the range of the
possible sewing field.