Operating instructions

Settings via the software
80
Operating instructions 906 - Version 00.0 - 05/2014
Selecting the line type
4. Use the line selection buttons (7) to select the type of line to be defined.
• Seamless path
The clamp moves over this path to the next position without sewing.
• Straight seam
A straight seam is sewn.
• Curved seam
A curved seam is sewn.
 After tapping the button for a straight or curved seam the correspond-
ing window for entering the seam parameters for this path opens.
Defining the seam parameters for the path
Figure 56: Teach-In: Seam parameters
Selecting the seam parameters for the path
5. Tap the respective parameter.
 The window for entry opens.
6. Enter the desired value for the parameter( 7.4.8 Entering parameter
values, page 72).