Operating instructions

Settings via the software
Operating instructions 906 - Version 00.0 - 05/2014
79
7.10 Creating a new seam program
A new seam program is created using a teach-In procedure. Individual
seam paths with specific seam parameters are defined via the operating
terminal in order to do this.
1. Tap the menu items File New Seam Program.
 The teach-In window is displayed.
Figure 55: Teach-In
Defining the starting point
2. Use the arrow keys (2) to move the cursor (3) to the desired starting
position.
3. Tap the OK button.
 The desired starting point is adopted and marked with a green dot.
ATTENTION
The machine can be damaged by sewing without material.
Place the material under the inner slider and outer frame prior to creat-
ing the seam program.
(1) - Cursor
(2) - Arrow buttons
(3) - OK button: Adopt
(4) - Save button
(5) - Delete button
(6) - Parameter button
(7) - Line selection button
①
②
⑥
④
⑤
③
⑦