Operating instructions

Settings via the software
78
Operating instructions 906 - Version 00.0 - 05/2014
7.8 Continuing a seam in Repair mode after an error
In Repair mode, you can move to any desired point on the contour.
E.g. in order to continue the seam program from this position after an
error has occurred.
1. Tap the Repair mode button on the main screen.
 The Repair mode window is displayed.
Figure 54: Repair mode
2. Use the Forwards and Back buttons to move to the point where sewing
is to continue.
3. Tap the Continue Sewing button.
 The program switches to the main screen. The seam continues to be
sewn from this point.
7.9 Resetting the counter
Depending on the machine parameter settings, the counter counts the
sewn programs or sequences up or down. You can use Reset Counter
button to reset the counter to the start value ( MP6 - Counters,
page 104).
1. Tap the Reset Counter button on the main screen.
 The counter is reset to the value defined in the machine parameters.