Operating instructions

Settings via the software
Operating instructions 906 - Version 00.0 - 05/2014
77
7.7 Replacing the hook thread bobbin
The machine automatically detects when the hook thread has been used
up and a new bobbin needs to be inserted.
In this case, or when a thread breakage occurs, the Manage Thread
Breakage window is automatically displayed.
Figure 53: Managing a thread breakage
1. Tap the Change Bobbin button.
2. Changing the bobbin ( 5.10 Replacing the hook thread bobbin,
page 34).
3. Use the Forwards and Back buttons to move to the point where sewing
is to continue.
4. Tap the Continue Sewing button.
 The program jumps back to the main screen and sewing of the seam
continues from the selected point.
Bobbin change without a request from the program
If you wish to independently insert a new bobbin without being requested
to do so by the program (e.g. when changing color) then you must tap the
Bobbin change button on the main screen. This confirms that a new
bobbin has been inserted and that the thread consumption must resume
counting from the value corresponding to the full bobbin capacity.
Updating the bobbin capacity
1. Tap Bobbin change on the main screen.
 The thread consumption continues to count from the value corre-
sponding to the full bobbin capacity.
WARNING
Risk of injury by the needle point or moving
parts.
Switch the sewing unit to the Safe Stop mode
before changing the hook thread bobbin.