Operating instructions

Settings via the software
Operating instructions 906 - Version 00.0 - 05/2014
61
7 Settings via the software
The controller is operated via the operating terminal (1) at the automatic
material feeder.
Figure 37: Operating terminal
The operating terminal contains a touch-sensitive screen (touchscreen).
Buttons and elements are displayed on the touchscreen. A command is
executed by touching a button or an element.
Activating a button/selecting an element
• Touch the corresponding button or element.
(1) - Operating terminal
①
ATTENTION
Damage can be caused to the touchscreen by sharp objects
Only operate the touchscreen with your finger or a special pen.