Operating instructions

Setting up

Operating instructions 906 - Version 00.0 - 05/2014

6.6 Oil lubrication

6.6.1 Oil lubrication

For lubricating the sewing unit, use only lubricating oil DA 10 or

oil of equivalent quality with the following specifications:

• Viscosity at 40 °C: 10 mm²/s

• Flash point: 150 °C

WARNING

Skin damage due to contact with oil.

Oil can cause a rash if it comes into contact with

skin.

Avoid any skin contact with the oil.

If oil gets on your skin, wash the affected areas

thoroughly.

CAUTION

Risk of environmental damage from oil.

Oil is a pollutant and must not enter the sewage sys-

tem or the soil.

Carefully collect waste oil and dispose of the waste

oil and oil-contaminated machine parts in the

legally prescribed manner.

ATTENTION

Machine damage possible due to incorrect oil level.

Too little or too much oil can result in damages to the machine.

Make sure that there is always sufficient oil in the reservoir.

ATTENTION

Machine damage possible due to incorrect oil.

An incorrect oil type can cause damage to the machine.

Only use oil that complies with the data in the manual.