Operating instructions

Setting up
54
Operating instructions 906 - Version 00.0 - 05/2014
6.3.4 Attaching the thread reel holders
Figure 33: Attaching the thread reel holders
1. Insert the thread reel holder (1) into the drill hole (4) screw together with
the nut (5)
2. Screw the thread plate (3) and the unwinding bracket (2) onto the thread
reel holder in such a way that they are exactly parallel above each other.
6.3.5 Setting up the pedal
The foot pedal can be freely positioned in front of the sewing unit as far as
the cable allows.
Figure 34: Setting up the pedal
1. Position the foot pedal (1) in front of the sewing unit so that the foot
pedal and machine can be comfortably operated.
(1) - Thread reel holder
(2) - Unwinding bracket
(3) - Thread plate
(4) - Hole
(5) - Nut
①
①
④
②
③
⑤
(1) - Foot pedal
①