Operating instructions

Setting up
Operating instructions 906 - Version 00.0 - 05/2014
51
6.2 Transporting the sewing unit
Fitting the transport locks
Transport locks must be fitted in order to protect the machine from dam-
age during transport.
Rotate the frame feet upwards
To increase the distance to the floor using a sturdy lifting carriage or forklift
for transporting the machine, you can rotate the frame feet into the frame.
Figure 31: Frame feet
1. Insert the lifting carriage or forklift under the frame and relieve the frame
feet.
2. Release the counternuts (1) on all 4 frame feet (2).
3. Rotate the frame feet (2) fully into the frame.
4. Tighten the nuts (1) so that the frame feet (2) remain fixed.
WARNING
Danger of crushing due to unstable transport.
Incorrect transport of the machine can result in
severe crushing injuries.
ALWAYS use a sturdy lifting carriage.
ALWAYS wear safety shoes and gloves
Lift the machine a MAXIMUM of 20 mm.
ALWAYS securely fasten the machine.
ATTENTION
Possible machine damage through unsecured transport.
Never transport the machine without the transport locks.
(1) - Counternut (2) - Frame foot
①
②